Interactive Tablet User Manual
Interactive Tablet User Manual Legal Information ©2019 Hangzhou Hikvision Digital Technology Co., Ltd. All rights reserved. About this Manual The Manual includes instructions for using and managing the Product. Pictures, charts, images and all other information hereinafter are for description and explanation only. The information contained in the Manual is subject to change, without notice, due to firmware updates or other reasons.
Interactive Tablet User Manual PRODUCTION OF CHEMICAL OR BIOLOGICAL WEAPONS, ANY ACTIVITIES IN THE CONTEXT RELATED TO ANY NUCLEAR EXPLOSIVE OR UNSAFE NUCLEAR FUEL-CYCLE, OR IN SUPPORT OF HUMAN RIGHTS ABUSES. IN THE EVENT OF ANY CONFLICTS BETWEEN THIS MANUAL AND THE APPLICABLE LAW, THE LATER PREVAILS.
Interactive Tablet User Manual Regulatory Information FCC Information Please take attention that changes or modification not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment. FCC compliance: This equipment has been tested and found to comply with the limits for a Class B digital device,pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation.
Interactive Tablet User Manual standards listed under the EMC Directive 2014/30/EU, the RoHS Directive 2011/65/EU. 2012/19/EU (WEEE directive): Products marked with this symbol cannot be disposed of as unsorted municipal waste in the European Union. For proper recycling, return this product to your local supplier upon the purchase of equivalent new equipment, or dispose of it at designated collection points. For more information see: http://www.recyclethis.info .
Interactive Tablet User Manual Preface Applicable Models This manual is applicable to interactive tablet (hereafter referred to the device). Symbol Conventions The symbols that may be found in this document are defined as follows. Symbol Description Danger Indicates a hazardous situation which, if not avoided, will or could result in death or serious injury.
Interactive Tablet User Manual • Do not touch the device with a wet finger to avoid risk of electric shock. • Do not operate the device in heavy rain, especially lightning weather to avoid electric shock. Contact professional technicians for repairing. • • • • • • • • • • Warning Do not let children climb onto the device. Keep small accessories away from children. If the device will not be used for a long time. Shut down the power of the device and disconnect the power supply.
Interactive Tablet User Manual Contents Chapter 1 Introduction ............................................................................................................... 1 Chapter 2 Operation and Maintenance Precautions .................................................................... 2 2.1 Use of Power Cable ................................................................................................................ 2 2.2 Cleaning and Maintenance ................................................
Interactive Tablet User Manual 6.1.1 Wired Network Settings .............................................................................................. 18 6.1.2 Wireless Network Settings .......................................................................................... 19 6.1.3 WLAN Hotspot Settings ............................................................................................... 21 6.2 Display Settings ................................................................................
Interactive Tablet User Manual Chapter 1 Introduction The Interactive tablet (hereafter referred to as the “device”) integrates functions of computers, projectors, interactive whiteboards, sound boxes, cameras (optional), HDTVs, advertising machines and so on.
Interactive Tablet User Manual Chapter 2 Operation and Maintenance Precautions The LCD panel on the device is made by high-precision technology. However, tiny spots on the screen that are always or never lit may be observed, or when observed from side, the color may and brightness may appear to be uneven. Yet the above phenomena are common among LCD displays rather than faults and will not affect the performance of the device.
Interactive Tablet User Manual • • • • • • • • Make sure the power supply is grounded. Do not let dust or metal attachment adhere to the power plug and socket. Do not modify the cable in any form. Do not place heavy object on the cable. Keep the cable away from heat. Do not disconnect the power plug by pulling the cable. Keep the power cable away from physical or mechanical damage. The cable is applicable only to the Interactive Display. Do not use it on other devices. 2.
Interactive Tablet User Manual Chapter 3 Connection and Installation 3.1 Precautions for Installation • • • • • • • • • • • • Clean the device screen and back before installation for best performance. For safety, only use the wall mount or base provided by the manufacture. Contact professional staff for wall mounting. Check the accessories before the installation. Contact the dealer if anything is missing. Do not install the device too tight. Otherwise the screen may be distorted.
Interactive Tablet User Manual Figure 3-2 Back Panel Table 3-1 Panel Description No. Interface Function Description 1 2-3 Light sensor USB Self-adaptive PC-USB and AndroidUSB 4 Power button Short press to go to power saving status. Long press to turn on or turn off the device.
Interactive Tablet User Manual Table 3-2 Interface Description No. Interface Function Description 7 TOUCH-USB Enternal touch interface 8 RS-232 RS-232 debug serial port 9 LAN 1 Network interface 1 10 LAN 2 Network interface 2 11 SPDIF OUT Digital multimedia speaker interface 12 EARPHONE Earphone output interface 13 LINE IN Audio input interface Interfaces on Back Panel Left Figure 3-4 Interfaces on Back Panel Left Table 3-3 Interface Description No.
Interactive Tablet User Manual 3.3 Connection to Personal Computer (PC) Warning The device must be disconnected from power supply before installation and disassembly. Note • The Touch-USB interface is needed only when the user needs to touch operate the external PC on the device. • Use high quality signal cable less than 10 meters in length for high VGA or HDMI signal transmission quality. • USB cable is not contained in the product. Please purchase USB cable with type A connector to type B connector. 3.
Interactive Tablet User Manual 3.3.2 HDMI Connection Figure 3-6 HDMI Connection 3.4 Computer Installation Figure 3-7 Computer Installation The computer box is installed at the side slot of the device. When installing the box, make sure its ventilation hole is facing the same direction with the rear panel as shown above. Fasten the two side screws to fix the box into position. Warning • The computer is an optional accessory.
Interactive Tablet User Manual 3.5 Mounting The device can be installed using wall mount or mobile mount, as shown below. Note The accessories of wall mount and mobile mount are different. Do not mix them up.
Interactive Tablet User Manual Figure 3-9 Wall Mount Side View Note The wall mount is mobile horizontally. Please leave a space no less than 6 cm at each side, or a space no less than 12 cm at one side for maintenance service.
Interactive Tablet User Manual Mobile Mounting Figure 3-10 Mobile Mounting 11
Interactive Tablet User Manual Chapter 4 Startup and Shutdown 4.1 Device Startup 4.1.1 Installed Without a Computer Box Steps 1. Connect the device to power supply. 2. Turn on the power switch, the power indicator on the front panel will turn red. 3. Push the Power button on the front panel to start up the device, the indicator will turn blue. 4.1.2 Installed with a Computer Box Install the box when the device is disconnected from power and turn on the power after the installation is finished.
Interactive Tablet User Manual Chapter 5 Sidebar Operations Note Software interfaces and functions may vary with device model. All pictures in this manual are for illustration purpose only. Turn on the device to go to the main page. Tap or to go to the sidebar. See the following figure for the descriptions of the icons. Figure 5-1 Main Page 5.1 Basic Operations Functions of the shortcut icons are described below.
Interactive Tablet User Manual 5.2 Channel Tap Channel in the sidebar to select PC, HDMI 1, HDMI 2, or VGA. 5.3 Control Menu Tap Tools in the sidebar to show the control menu. The following operations are avaliable. Figure 5-2 Control Menu • • • • • Tap Screenshot to capture the current page. Tap Stopwatch and tap Start to count. Tap Calculator to calculate quickly. Tap Countdown to set countdown time and count down. Tap Gesture Ball. Operations of the gesture ball are described as follows.
Interactive Tablet User Manual Table 5-2 Gesture Ball Operations Operation • • • • • • • • • Description Operation Swipe up Display all the windows. Swipe down Swipe left Open the Whiteboard. Swipe right Description Open the control menu. Enable annotating. Long press and move Move the gesture ball. —— —— Tap Annotation and pops up. Tap to enable annotating. You can add notes on the current page. Tap Note to create a note page. Tap Settings to open system settings. Tap Camera to open the camera.
Interactive Tablet User Manual Table 5-3 Screenshot Toolbar Descriptions Icon Description Capture the whole page. Save the screenshot in the capture area. Exit screenshot. 5.5 Annotating Tap to enable annotating. You can add annotations anywhere on the page by touching and moving on the screen. The annotation bar pops up on the side of the screen. Figure 5-4 Annotating Table 5-4 Annotation Bar Descriptions Icon Description • Select the pen color and hue range. • Select pen thickness.
Interactive Tablet User Manual Icon Description Save the annotation page. The annotations are saved in the default directory: SD card/Pictures/Screenshots. Scan QR code to download in LAN indicates that you can only download the annotation in LAN. Exit annotating.
Interactive Tablet User Manual Chapter 6 System Settings Tap Apps on the main page to go to the functional interface. Figure 6-1 Functional Interface 6.1 Network Settings 6.1.1 Wired Network Settings Steps 1. Select Settings → Network → Wired Network . 2. Check Wired Network. Figure 6-2 Wired Network Settings 3. Optional: Tap Network Settings to enable Proxy and Static IP or not.
Interactive Tablet User Manual Proxy Settings When proxy enabled, you need to set Proxy Host and Port No., and set the URLs that do not use the proxy. Figure 6-3 Proxy Settings Static IP Settings When static IP enabled, you need to set network parameters, such as Static IP Address, Gateway, Subnet Mask, DNS1 Address, and DNS2 Address. Figure 6-4 Static IP Settings 6.1.2 Wireless Network Settings Steps 1. Select Settings → Network → Wireless Network . 2.
Interactive Tablet User Manual Connect to Available Networks • Tap the desired network in the available network list, and enter the password to connect to the network. • Tap Connect, and network information page pops up. Tap Clear Network to delete the information of this network. Tap Cancel to exit the page. Figure 6-5 Wireless Network Information Add Other Networks Steps 1. Tap Add Other Networks. 2. Enter Wi-Fi name and select Security.
Interactive Tablet User Manual Figure 6-6 Add Other Networks 3. Optional: Check Display Advanced Settings to select proxy and network IP type. 4. Tap Connect to connect the device to the added wireless network. 6.1.3 WLAN Hotspot Settings When the interactive tablet is connected to the wired network, it can provide wireless network for other devices with WLAN hotspot enabled. Steps 1. Select Settings → Network → Hotspot . 2. Check Portable WLAN Hotspot. 3.
Interactive Tablet User Manual Figure 6-7 Set WLAN Hotspot 4. Tap Save to set WLAN hotspot. Note If the device supports 2.4 GHz and 5 GHz at the same time, it is recommended to set AP band to 5 GHz to better experience functions such as wireless screen mirroring. 6.2 Display Settings Select Settings → Display to adjust parameters, such as brightness and sleeping time.
Interactive Tablet User Manual Figure 6-8 Display Settings • Auto Brightness: The device can adjust brightness according to the environment automatically when enabled. • Brightness Parameter: Slide the slider to adjust the brightness of the screen. • Bluelight Filter: Tap Bluelight Filter to protect your eyes by filtering blue light. • Filter Level: Slide the bar to adjust the filter level. • Wallpaper: Tap Wallpaper to set dynamic wallpapers or pictures in the system as wallpaper.
Interactive Tablet User Manual Figure 6-9 Audio Settings 2. Tap Audio Mode, and select a mode from Standard, Music, Movie, and User. 3. Set the parameters according to the audio mode. - In Standard, Music, and Movie mode, you can adjust Balance and Volume. - In User mode, you can adjust High Pitch, Low Pitch, Balanceand Volume. 6.4 Language & Input Settings Steps 1. Select Settings → Language & Input . 2. Tap Language to select multilanguage. 3. Tap Input Method to set multilingual input method.
Interactive Tablet User Manual Figure 6-11 Time & Date Settings 2. Check Time Sync. 3. Tap Select Time Zone to select the region where you are. 4. Optional: Check 24-Hour Format to set 24-hour format. Note When Time Sync is closed, you can set date and time manually. 6.6 Application Management Steps 1. Check Settings → Application Management . 2. Tap the desired APP, and Application Details pops up. 3. You can perform operations, such as Forced Stop, Clear Data, Clear Cache, and Uninstall.
Interactive Tablet User Manual Figure 6-12 Application Details Note • The built-in APP cannot be uninstalled. • You can tap the icon in Application Details to open the APP. 6.7 Intelligent Temperature Control The device monitors inner temperature in real time. When the temperature exceeds the set warning or alarming temperature, the device will display prompt messages for you to take measures in a timely manner. Steps 1. Select Settings → Auxiliary Functions → Intelligent Temperature Control .
Interactive Tablet User Manual Figure 6-13 Intelligent Temperature Control 2. Check Intelligent Temperature Control. 3. Slide the slider to set Warning Temperature and Alarming Temperature. - When the temperature exceeds the set warning temperature, the temperature in status bar on the upper right corner turns red. - When the temperature exceeds the set alarming temperature, the temperature information pops up and prompts you to turn off the device. 6.
Interactive Tablet User Manual • Device Name: View the device name, and rename the device by tapping Device Name. • Input Source Settings: Tap Input Source Settings to set the Startup Input Source and auto channel switch. • Startup/Shutdown Settings: Set Startup Mode, Scheduled Startup/Shutdown, and No-signal Shutdown. • Wakeup Settings: Set Wake from Serial Port, and Wake from Signal Source.
Interactive Tablet User Manual • Wake from Serial Port: Enable or disable the serial port channel. • Wake from Signal Source: Enable or disable the signal source channel. 6.8.4 HDMI Output Settings Select Advanced Settings → HDMI Output Settings . • Output Resolution Settings: 3840 × 2160, 1920 × 1080, and 720 × 480 are available. • Audio Settings: Check Audio Settings to play audio. • HDCP: The monitor connected to the interactive tablet need to support HDCP. 6.8.
Interactive Tablet User Manual Chapter 7 Intelligent Applications 7.1 FileBrowser Tap FileBrowser on the main page. All the files under the current directory are shown by default. Tap Image, Doc, and AV, to sort and view specified files. Icons are described as follows. Figure 7-1 FileBrowser Table 7-1 Descriptions of File Management Icons Icon Description Icon Description Back/Forward Go to the previous/ next page. New Create a folder. List File view mode, including view in list and view by icon.
Interactive Tablet User Manual Figure 7-2 Edit the Files Table 7-2 Descriptions of Editing Icons Icon Description Icon Copy To Description Select All Select all the files. Copy the selected file. Cut To Move the selected file. Delete Delete the selected file. Share Share the selected file. —— —— Note Long press the file to copy, move, delete, share, rename, and view information. 7.2 Browser Connect the device to the Internet, and tap Browser.
Interactive Tablet User Manual Table 7-3 Introduction of System Preset Applications Application Introduction Whiteboard Whiteboard is used for drawing and writing. You can use it to save, move, zoom in, zoom out, delete, and download the contents. Note Note is used for recording brief information. You can swipe up from the bottom of the screen to use Note. User Manual You can use the User Manual to do basic operations.
Interactive Tablet User Manual Appendix A. FAQs Question Cause and Solution Why do the condensations appear frequently on the screen? Tempered glass is installed on the outer screen to provide protection. There is a gap between the screen and the tempered glass for air convection. The main reason is that there is a temperature difference between the screen and the outside. Hot air condenses on the glass surface at a lower temperature, which results in condensations.
Interactive Tablet User Manual Question Cause and Solution Why does the device HDMI channel have no input signal? • Check if the input source works normally. • Change HDMI interface or cable. • If PC is accessed, set HDMI output on your PC. How to deal with image ghosting? • Check if the VGA cable is loose. • Try to change VGA cable or change to another VGA interface. How to deal with image color abnormality after accessing PC via VGA channel? • Check if the VGA cable is loose.
UD17612B-A
