9-inch LCD Display Unit User Manual M6MM0M1806W001
Thank you for purchasing our product. If there is any question or request, please do not hesitate to contact us. This manual is applicable to DS-D5019 Series monitors. This manual may contain several technically incorrect places or printing errors, and the content is subject to change without notice. The updates will be added into the new version of this manual. We will readily improve or update the products or described in the manual.
Regulatory Information 2002/96/EC (WEEE directive): Products marked with this symbol cannot be disposed of as unsorted municipal waste in the European Union. For proper recycling, return this product to your local supplier upon the purchase of equivalent new equipment, or dispose of it at designated collection points. For more information see: www.recyclethis.info. 2006/66/EC (battery directive): This product contains a battery that cannot be disposed of as unsorted municipal waste in the European Union.
Hikvision® 19-inch LCD Display Unit User’s Manual This manual, as well as the software described in it, is furnished under license and may be used or copied only in accordance with the terms of such license. The content of this manual is furnished for informational use only, is subject to change without notice, and should not be construed as a commitment by Hikvision Digital Technology Co., Ltd. (Hikvision).
Chapter1. Introduction 1.1 Key Features Support 1366×768 HD display; User-friendly operation menu; Three image modes to adapt different environment; 1 channel HDMI 1.3 input interface; Support software spread-spectrum technology to reduce EMI radiation; Standby Power Consumption is lower than 0.5W. Viewing Angle:Horizontal 90°, Vertical 65º. 1.2 Power Supply Connection Insert the 3-pin power device into well-grounded socket and turn the rocker switch on. Figure 1.
Chapter2. Device Interfaces Figure 2.
Chapter3. Panel Keys Keys on lower right corner of the display unit panel are shown in the Figure 3.1 Keys on the Display Unit. Figure 3.1 Keys on the Display Unit The functions of the keys on lower right corner of the display unit vary according to different situations.
Chapter4. Basic Operation 4.1 Contrast Turn on the display unit when the power supply is on and input source is confirmed. Press ◄ key of the remote controller to enter the menu as shown on the right. press ◄ or ► to adjust the value of contrast. Press MENU to accomplish the contrast adjustment. Figure 4.1 Input Source 4.2 Brightness Turn on the display unit when the power supply is on and input source is confirmed. Press ► key of the remote controller to enter the menu as shown on the right.
4.4 Main Menu 4.4.1 Image Settings Purpose: You can adjust the picture parameters by switching image modes and adjust the values of contrast, brightness, color temperature, auto adjust, color adjust. Steps: 1. Press Menu key to enter the main menu interface as shown below. 2. Press MENU key to enter the setting you want. 3. Press ◄ or ► to adjust the value. It applies for adjusting contrast, brightness, color temp and other parameters.
4.4.2 Image Adjustment Purpose: When the input source is selected VGA, you can adjust the VGA parameters. It is for adjusting VGA H position, V Position, clock and phase. Steps: 1. Press Menu key to enter the main menu interface. 2. Press ◄ key to enter the VGA parameter setting interface. (You can select Auto Adjust and press ◄ or ► to adjust the VGA parameters automatically or adjust it manually) 3. Select H Position and press ◄ or ► to adjust the H Position 4.
4.4.3 OSD Setting Purpose: You can set the language, blending and OSD duration of the menu. Steps: 1. Press MENU key to enter the main menu interface. 2. Press ◄ key twice and press MENU key to enter the【Language】interface, press ◄ or ► to switch the language you want. 3. Select OSD H.Pos/OSD V.Pos to adjust the position of OSD with ◄ or ►. 4. Select OSD Timer to adjust the OSD duration with ◄ or ►: 5Sec~60Sec. 5. Select Transparency to adjust the OSD transparency value with ◄ or ►. 6.
4.4.4 Other Settings Purpose: You can set Mode, Signal Source, Aspect Ratio, DCR. Steps: 1. Press MENU key to enter the main menu interface. 2. Press triple◄ key and press MENU key to enter the Mode interface, press ◄ or ► to switch the mode between PC/GAME/MOVIE. 3. Press ◄ or ► to change the Signal Source between VGA and HDMI. 4. Press ◄ or ► to switch the Aspect Ratio between 16:9/AUTO/4:3. 5. Press ◄ or ► to switch the DCR On/Off. 6.
4.4.5 Reset Setting Purpose: You can reset settings to the factory defaults. Steps: 1.Press MENU key to enter the main menu interface. 2.Press ◄ key 4 times and press MENU key to reset settings to the factory defaults. Figure 4.4.
Appendix: Specifications Device Model DS-D5019 Series Display Type Screen Size Dot Pitch TFT-LED Backlight 18.5" 0.300×0.300 mm Max Resolution 1366×768 Best Operation Resolution 1366×768@60Hz Brightness 200cd/m² Contrast 600:1 Response Time 5ms Color 16.7M Viewable Area Viewing Angle 409.8×230.
Structure Figure 11
12
13
