Operation Manual

Note
If you forgot your password, you have to uninstall the client and reinstall it. You need to re-
congure the client.
4.2 Basic Conguraon
4.2.1 Congure the Serial Port
Aer registraon, Serial Port Conguraon interface will pop up. You need to rstly congure the
serial port to control screens. Incorrect serial port
conguraon may result in screen control
failure.
Before You Start
Ensure that the serial ports are already connected correctly, otherwise some
funcons will be
unavailable or abnormal.
Steps
Figure 4-2 Serial Port Conguraon
1. Select Serial Port. You can obtain your serial port in Computer Management → Device
Manager → Ports .
2. Select Baud Rate. 9600 is recommended.
3. Enable
Connecon.
Note
When Auto open when starng is checked, the serial port set here will be connected
automacally when you log in to the client next me.
LCD Display Controller V2.0 Operaon Manual
9