Operation Manual

2.2 Screen Control
You can use remote control to control one screen, mulple screens or all screens.
To control one screen, press IDSEL to select screen ID.
To control mulple screens, press IDSEL to select screen IDs. For example, press IDSEL → 0101 → 2
to select screen 0101 and screen 0202.
Note
Only some LCD display models support mulple-screen control.
To control all screens, press IDSEL, and then press IDALL.
2.3 Virtual Remote Control
You can use Remote Control in the lower le corner of the client interface to control the display(s).
Figure 2-1 Virtual Remote Control
LCD Display Controller V2.0 Operaon Manual
3