User Manual

Network Video Recorder User Manual
UM NVR v4.xx 111717NA 84
Chapter 9 Disk Array (RAID)
Purpose
A disk array is a data storage virtualization technology that combines multiple physical disk drives
into a single logical unit. Also known as a “RAID,” an array stores data over multiple HDDs to provide
enough redundancy so that data can be recovered if one disk fails. Data is distributed across the
drives in one of several ways called “RAID levels” based the redundancy and performance required.
Disk arrays are supported by DS-9600NI-I Series devices only.
9.1 Creating a Disk Array
Purpose
The device supports software-based disk arrays. Enable the RAID function as required. Two
ways are available for creating an array: one-touch configuration and manual configuration.
9.1.1 Enabling a RAID
Purpose
Perform the following steps to enable the disk array function.
Step 1 Go to Storage > Advanced.
Figure 9-1 Advanced
Step 2 Check Enable RAID.
Step 3 Click Apply.
Step 4 Reboot the device to have the settings take effect.