User Manual

Network Video Recorder User Manual
UM NVR v4.xx 111717NA 75
Event and Alarm Settings and Chapter 13 VCA Event Alarm for details.
8.5 Configuring Continuous Recording
Step 1 Go to Camera > Encoding Parameters > Recording Parameters.
Step 2 Set the continuous main stream/sub-stream recording parameters for the camera.
Step 3 Go to Storage > Recording Schedule.
Step 4 Set the record type to Continuous.
Step 5 Set the schedule for the continuous recording. Refer to Chapter 8.4 Configuring
Recording Schedule for details.
Figure 8-11 Record Schedule
8.6 Configuring Motion Detection Triggered Recordings
You can configure recordings triggered by motion detection events.
Step 1 Go to System > Event > Normal Event > Motion Detection.
Step 2 Configure motion detection and select the channel(s) to trigger the recording when a
motion event occurs. Refer to Chapter 12.3 Configuring Motion Detection Alarm for
details.