User Manual

Network Video Recorder User Manual
UM NVR v4.xx 111717NA 71
8.3.3 Picture
Step 1 Picture refers to live picture capture in continuous or event recording type.
Step 2 Picture Quality: Set the picture quality to low, medium, or high. Higher picture
quality requires more storage space.
Step 3 Interval: The interval of capturing live pictures.
8.3.4 ANR
ANR (Automatic Network Replenishment) function enables IP cameras to save the
recording files in local storage when the network is disconnected. When the network
is re-connected, it uploads the files to the device.
Step 1 Enable the ANR (Automatic Network Replenishment) function via a Web browser
(Configuration > Storage > Schedule Settings > Advanced).
8.3.5 Configuring Advanced Recording Settings
Step 1 Go to Storage > Schedule Settings > Record Schedule/Capture Schedule.
Step 2 Check the Enable checkbox to enable scheduled recording.
Step 3 Click Advanced to set the recording parameters.
Figure 8-8 Advanced Record Settings
• Record Audio: Check the checkbox to enable or disable audio recording.
• Pre-record: The time set to record before the scheduled time or event. For
example, if an alarm triggers the recording at 10:00, and the pre-record time
is 5 seconds, the device will start to record at 9:59:55.