User Manual

Network Video Recorder User Manual
UM NVR v4.xx 111717NA 68
Step 4 Select the Group number for the current HDD.
Step 5 Click OK.
Regroup the cameras for HDD if the HDD group number is changed.
Step 6 Go to Storage > Storage Mode.
Step 7 Check the Group tab checkbox.
Step 8 Select the group No. from the list.
Step 9 Check the checkbox to select the IP camera(s) to record/capture on the HDD
group.
Figure 8-6 Storage Mode-HDD Group
Step 10 Click Apply.
Reboot the device to activate the new storage mode settings.