User Manual

Network Video Recorder User Manual
UM NVR v4.xx 111717NA 57
7.3.2 Calling Presets
Purpose
A preset enables the camera to point to a specified position such as a window when an event
takes place.
Step 1 Click on the quick settings toolbar of the PTZ camera Live View.
Step 2 Click in the lower right corner of Live View.
Step 3 Select the preset No. from the drop-down list.
Step 4 Click Call to call it, or click in the lower right corner of Live View, and click the
configured preset to call it.
Figure 7-5 Call Preset (1)
Figure 7-6 Call Preset (2)
7.3.3 Setting Patrols
Purpose
Patrols can be set to move the PTZ to key points and have it stay there for a set duration
before moving on to the next key point. The key points correspond to the presets.
Step 1 Click on the quick settings toolbar of the PTZ camera’s Live View.
Step 2 The PTZ control panel displays on the right of the interface.
Step 3 Click Patrol to configure patrol.
Figure 7-7 Patrol Configuration
Step 4 Select the patrol No. in the text field.