User Manual

Network Video Recorder User Manual
UM NVR v4.xx 111717NA 40
Figure 4-2 Edit IP Camera
Step 3 Set Adding Method to Manual.
• Plug-and-Play: The camera is physically connected to the PoE interface. Its
parameters cannot be edited. You can go to System > Network > TCP/IP to
change the IP address of the PoE port.
• Manual: Add IP camera without a physical connection, via the network.
Step 4 Enter the IP address, the user name, and password of administrator manually.
Step 5 Click OK.
4.2.3 Configuring PoE Interfaces
Purpose
When long-distance PoE transmission (100 to 300 m) is required, enable long distance
mode for the PoE channel.
Step 1 Go to Camera > Camera > PoE Settings.
Step 2 Enable or disable long network cable mode by selecting Long Distance or Short
Distance radio.
• Long Distance: Long-distance (100 to 300 meters) network transmissions
via PoE interface.
• Short Distance: Short-distance (<100 meters) network transmission via PoE
interface.