User Manual

Network Video Recorder User Manual
UM NVR v4.xx 111717NA 30
Step 3 Draw the same pattern again to confirm it. When the two patterns match, the pattern is
configured successfully.
If the two patterns are different, you must set the pattern again.
3.4 Log In to the Device
3.4.1 Log In via the Unlock Pattern
Only the admin user has permission to unlock the device.
Configure the pattern before unlocking. Refer to Chapter 3.3 Configuring the Login
Unlock Pattern.
Step 1 Right-click the mouse and select the menu to enter the interface.
Figure 3-4 Draw the Unlock Pattern
Step 2 Draw the pre-defined pattern to unlock and enter the menu operation.
If you have forgotten your pattern, select Forgot My Pattern or Switch User to enter
the normal login dialog box.