User Manual

Network Video Recorder User Manual
UM NVR v4.xx 111717NA 156
Figure 16-6 SNMP Settings
Step 2 Check the Enable checkbox. A message will pop up to notify about a possible security
risk. Click Yes to continue.
Step 3 Configure the SNMP settings as needed.
• Trap Address: SNMP host IP address.
• Trap Port: SNMP host port.
Step 4 Click Apply.
16.7 Configuring E-Mail
Purpose
The system can be configured to send an e-mail notification to all designated users when a
specified event occurs such as when an alarm or motion event is detected, the administrator
password is changed, etc.