User Manual

DS-7700NI-SP/9000/9600 Series HDVR/NVR User’s Manual
97
Figure 105 POS Setting
2) End Line Identifier: You can edit the End Line Identifier string when the transaction data
should be finished to display on the video.
Note: Hex stands for Hexadecimal, which is a numeral system based on 16 common symbols 0–9
and A–F (or a–f). Click Hex check box to enable Hexadecimal mode.
3) Line Delimiter: Click to edit the line delimiter character via virtual keyboard as follows.
Note: Up to 40 characters can be displayed on each line, and the exceeding content will be
automatically displayed at the next line.
Note: Hex stands for Hexadecimal, which is a numeral system based on 16 common symbols 0–9
and A–F (or a–f). Click Hex check box to enable Hexadecimal mode.
4) Case Sensitive: Click check box to differentiate between capital and lowercase letters.
5) Timeout: Click to set the Timeout period. When a message is delivered in abnormal status
and can’t be ended, the message will be forced to terminate over the timeout period. The
default timeout period is 60s.
6) Extra Line(s): Click to select extra lines (from 0 to 10 lines) to be displayed on the video
after detecting of End Line Identifier string. This option is designed for transaction data
which ends with dynamic information (such as transactional time, etc) which could not be set
as End Line Identifier string yet is still required to be displayed.