User Manual

DS-7700NI-SP/9000/9600 Series HDVR/NVR User’s Manual
80
2. Enter the information for new user, including User Name, Password, Level and User’s MAC or
IP Address.
Level: Set the user level to Guest or Operator. Different user levels have different default
operating permission.
 Guest: Guest has the default permission of local log search and remote log search.
 Operator: Operator has the default permission of local log search, remote log search, two-
way audio and camera configuration.
3. Click the OK button to confirm adding the user. Once a new user has been created, the fields
behind Users will become editable, as shown in Figure 82.
Figure 82 User Settings Menu
Changing the permission of User
The Administrator can change the permission of both guest and operator. To change the permission:
1. Enter the User menu, shown in Figure 75 by going to Menu > System Configuration > User.
2. Click to enter the Permission interface, as shown in Figure 83.
Figure 83 Permission Settings Menu
3. Set the operation permission of Local Configuration, Remote Configuration and Camera
Configuration for the user.