User Manual

DS-7700NI-SP/9000/9600 Series HDVR/NVR User’s Manual
28
Figure 18 DST Settings Menu
5. To acquire the time and date over an NTP (Network Time Protocol) Server, check the Enable
NTP checkbox. You can set the interval and enter your own NTP server.
6. Click the Apply button to save the settings and click to exit out of the menu. Clicking
without clicking the Apply button will exit the menu without saving.
Checking the Status of Your DVR
The current status of your DVR can be checked at anytime by going to the System Information menu. The
System Information menu, as shown in Figure 19, can be accessed by going to Menu > System
Information.
Figure 19 System Information Menu
1. Select the Device Info tab to enter the Device Information menu to view the device name, model,
serial No., firmware version and encode version, as shown in Figure 19.