User Manual

DS-7700NI-SP/9000/9600 Series HDVR/NVR User’s Manual
19
Direction Buttons: The Direction buttons are used to navigate between different fields and
items in menus. In playback mode, the Up and Down button is used to fast-forward and
rewind recorded video. The left and Right button will select the next and previous day of or
pause the video. In Single Play mode, pressing the Enter button will advance the video by a
single frame.
Enter Button: The Enter button is used to confirm selection in any of the menu modes. It can
be used to tick checkbox fields. In Playback mode, it can be used to play or pause the video.
In Single Play mode, pressing the Enter button will advance the video by a single frame.
9. Jog Shuttle Control: The Jog Shuttle control can be used to move the active selection in a menu. In
the playback mode, the outer ring is used to speed up/slow down the video. The inner ring can be
used to jump 30 seconds forward/backward in a video. In Preview mode, it can be used to cycle
through different channels.
10. Power Button: Powers DVR on/off.
Figure 12 7700 NVR Front Panel Controls
The controls on the front panel include:
1. Status Indicators:
Alarm: Alarm indicator turns red when a sensor alarm is detected.
Ready: Ready indicator turns blue when DVR is functioning properly.
Status: Status indicator turns blue when DVR is controlled by an IR remote. Indicator turns
red when controlled by a keyboard and purple when IR remote and keyboard is used at the
same time.
HDD: HDD indicator blinks red when data is being read from or written to HDD.
Modem: Reserved
TX/RX: TX/RX indictor blinks blue when network connection is functioning properly.
2. DVD-ROM: Slot for DVR-ROM.
3. Direction/Enter Buttons:
Direction Buttons: The Direction buttons are used to navigate between different fields and
items in menus. In playback mode, the Up and Down button is used to fast-forward and
rewind recorded video. The left and Right button will select the next and previous day of or
pause the video. In Single Play mode, pressing the Enter button will advance the video by a
single frame.
Enter Button: The Enter button is used to confirm selection in any of the menu modes. It can
be used to tick checkbox fields. In Playback mode, it can be used to play or pause the video.
In Single Play mode, pressing the Enter button will advance the video by a single frame.
4. Control Buttons: