User Manual

DS-7700NI-SP/9000/9600 Series HDVR/NVR User’s Manual
18
2. IR Receiver: Your DVR may also be controlled with the included IR remote control, shown in Figure
13. Batteries (2XAAA) must be installed before operation.
3. Front Panel Lock: You can lock or unlock the panel by the key.
4. DVD-ROM: Slot for DVR-ROM.
5. Alphanumeric Buttons: Alphanumeric buttons used in various menus of the DVR. Some uses
include:
• Switching to the corresponding channel in Preview or PTZ Control mode.
• Inputting numbers and characters in Edit mode.
• Switching between different channels in Playback mode.
6. USB Ports: Connects USB mouse or USE flash memory devices.
7. Control Buttons:
• ESC Button: The ESC button is used to escape to the previous menu and to arm/disarm the
DVR in Preview mode.
• REC/SHOT Button: The REC/SHOT button is used to enter the Quick Schedule Recording
interface. If used when controlling a PTZ, pressing the REC/SHOT button and then a
Numeric button will call a PTZ preset.
• PLAY/AUTO Button: The PLAY/AUTO button is used to enter the Playback menu. It is
also used to turn audio on/off in the Playback menu and auto scan in the PTZ Control menu.
• ZOOM+ Button: The ZOOM+ button is used to zoom the PTZ camera in when in the PTZ
Control menu.
• A/FOCUS+ Button: The A/FOCUS+ button is used to adjust focus in the PTZ Control
menu. It is also used to switch between input methods (upper and lowercase alphabet,
symbols and numeric input). It can also be used to clear entire masked areas, such as in the
Motion Detection and Privacy Mask menus.
• EDIT/IRIS+ Button: The EDIT/IRIS+ button is used to edit text fields. When editing text
fields, it will also function as a Backspace button to delete the character in front of the cursor.
On checkbox fields, pressing the EDIT/IRIS+ button will tick the checkbox. In PTZ Control
mode, the EDIT/IRIS+ button opens up the iris of the camera. In Playback mode, it can be
used to generate video clips for backup.
• MENU/WIPER Button: Pressing the MENU/WIPER button will return the user to the Main
menu (after successful login). Pressing and holding the button for 5 seconds will turn off
audible key beep. The MENU/WIPER button will also bring up Sensitivity Interface settings.
In PTZ Control mode, the MENU/WIPER button will start wiper (if applicable).
• F1/LIGHT Button: The F1/LIGHT button when used in a list field will select all items on
the list. In PTZ Control mode, it will turn on/off PTZ light.
• F2/AUX Button: The F2/AUX button is used to cycle through tab pages. It will also bring up
the Channel & OSD Position settings.
• MAIN/SPOT/ZOOM- Button: The MAIN/SPOT/ZOOM- button is used to switch to the
control of spot output. In PTZ Control mode, it can be used to zoom the camera out.
• PREV/FOCUS- Button: The PREV/FOCUS- button is used to switch between single screen
and multi-screen mode. In PTZ Control mode, it is used to adjust the focus in conjunction
with the A/FOCUS+ button. It can also be used to select entire masked areas, such as in
Motion Detection and Privacy Mask menus.
8. Direction/Enter Buttons: