User Manual

151
Network detection
You can view the network traffic to obtain real-time information and connecting status of your DVR.
To view network traffic:
1. Enter the Network Detection menu by going to Menu > System Maintenance > Network
Detection.
2. Select the Traffic tab and you can view the sending rate and receiving rate information on the
interface, as shown in Figure 176. The traffic data is refreshed every 1 second.
Figure 176 Traffic Detection
To configure network detection:
1. Enter the Network Detection menu by going to Menu > Maintenance > Network Detection.
2. Select the Network Detection tab to enter the Network Detection menu, as shown in Figure 177
Figure 177 Network Detection