User Manual
DS-7700NI-SP/9000/9600 Series HDVR/NVR User’s Manual
10
Independent configuration for each channel, including resolution, frame rate, bit rate, image quality,
etc.
The video input/output quality is configurable.
Each channel supports two kinds of compression parameters, the continuous and event, which can be
configured locally and remotely.
Encoding for both audio/video composite stream and video stream; audio and video synchronization
during composite stream encoding.
Support watermark.
Local Monitoring
Simultaneous HDMI, VGA and CVBS outputs.
HDMI output and VGA output at up to 1920*1080P resolution.
1/4/6/8/9/16 –division live view is supported, and the display sequence of screens is adjustable.
Live view screen can be switched in group, and manual switch and automatic cycle live view is also
provided, the interval of automatic cycle can be adjusted.
The selected live view channel can be shielded.
Motion detection, tamper-proof, video exception alert and video loss alert functions.
Manual video quality detection and handling.
Privacy mask.
Several PTZ protocols supported; PTZ preset, patrol and pattern.
Zooming in by clicking the mouse and PTZ tracing by dragging mouse.
HDD Management
Up to 16 disks (8 SATA hard disks and 8 network disks) and 1 eSATA disk can be connected.
Each SATA hard disks and network disks with a maximum of 4TB storage capacity and eSATA with
less than 2TB capacity.
Support eSATA disk for recording or backup.
HDD group management.
HDD quota management; different capacity can be assigned to different channel.
Support S.M.A.R.T and bad sector detection.
Recording, Capture and playback
Holiday recording schedule configuration.
Continues and event video encoding parameters.
8 recording periods with separated recording types configurable.
Pre-record and post-record for alarm, motion detection for recording, and pre-record time for
schedule.
Searching record files and captured pictures by events (alarm input/motion detection).
Customization tags, searching and playing back by tags.
Locking and unlocking record files.
Searching and playing back record files by channel number, recording type, start time, end time, etc.
Smart search for the motion event when playing back.
Zooming in when playback.
Reverse playback for multi-channel.
Supports pause, speed up, speed down, skip forward, and skip backward when playback, locating by
dragging the mouse.