User Manual

DS-7700NI-SP/9000/9600 Series HDVR/NVR User’s Manual

 Enable Server Authentication: Enable if email server requires authentication. Enabling

Server Authenticating will enable the User Name and Password fields.

 User Name: User name to use for server authentication.

 Password: Password to use for server authentication.

 SMTP Server: Address for SMTP server.

 SMTP Port: Port for SMTP server.

 Enable SSL: Enable Secure Sockets Layer (SSL) for out-going e-mail.

 Sender Name: The sender name to use when an e-mail is sent out from the DVR.

 Sender’s Address: The sender’s address to use when an e-mail is sent out from the DVR.

 Enable Attached Picture: Enabling will attach a small picture segment (Interval can be set

below the Enable Attached Picture checkbox) to the out-going e-mail.

 Receiver: Click to edit Receiver Settings. Input the receiver’s name and address. Click

Apply to save the settings. The e-mail address will be added to the Recipients list. You can

also delete the receiver by clicking .

 Enable Email Interval: Enable if need sending email between time intervals. The time

interval can be set 1,3,5,10 minutes.

4. You may now test the e-mail settings by clicking the Test button.

5. Select the Apply button to save the e-mail settings and select to return to the previous menu.

Selecting without clicking Save will quit out of the menu without saving settings.

Configuring Hot Spare Settings

If there are a group of DVRs working in the same net, we can use the hot spare function to increase the

reliability of the whole system.

To setup hot spare settings:

1. Enter the Hot Spare Configuration menu by going to Menu > System Configuration > Hot Spare.

As shown in Figure 99.

Figure 99 Hot Spare Configuration Menu