User Manual

DS-7700NI-SP/9000/9600 Series HDVR/NVR User’s Manual
79
Figure 80 Edit User Menu
2. Enter the old password in the Old Password textbox.
3. Check the Change Password checkbox.
4. Enter the new password in the Password textbox.
5. You can also enter the User’s MAC or IP Address of the remote PC. If it is configured and
enabled, it only allows the remote user with this MAC or IP address to access the device.
6. Click the OK button to save the setting and back to the up level.
Adding a New Remote/Local User
You may add up to 31 new users to your DVR.
To add new users:
1. On the User tab shown in Figure 79, click Add to enter Add User interface, as shown in Figure 81.
Figure 81 Add User Menu