User Manual

DS-7700NI-SP/9000/9600 Series HDVR/NVR User’s Manual
131
 Export: Use the eSATA for backup.
 Record/Capture: Use the eSATA for record/capture.
4. Click the Apply button to save the settings.
Configuring Quota Mode
Each camera can be configured with allocated quota for record or picture capture.
To configure quota mode:
1. Enter the quota mode menu by going to Menu > System Configuration > HDD.
2. Select the Storage Mode tab, as shown in Figure 154.
Figure 154 Quota Mode Settings Menu
3. Select the Mode to Quota.
4. Select a camera for which you want to configure quota.
5. Enter the storage capacity in the text fields of Max. Record Capacity (GB) and Max. Picture
Capacity (GB).
6. If the same settings can be applied in other channels, click Copy.
7. Click the Apply button to save the settings.
Note:
If the quota capacity is set to 0, then all cameras will use the total capacity of HDD for record and picture
capture.
Managing HDD Group
Multiple HDDs can be managed in groups. Video from specified channels can be recorded onto a
particular HDD group through HDD settings. To managing HDD Group:
1. Enter the HDD menu by going to Menu > System Configuration > HDD.
2. Select the Storage Mode tab, as shown in Figure 155.
3. Select the Mode to Group, as show in Figure 156.