User Manual

DS-7700NI-SP/9000/9600 Series HDVR/NVR User’s Manual
130
4. Click the Apply button.
5. Click to exit.
Enabling HDD Sleeping mode
Enabling HDD sleeping mode will allow the HDD enter low power cost work mode when no recording
work is detected.
To enable HDD sleeping mode:
1. Enter the HDD menu by going to Menu > System Configuration > HDD.
2. Select the Record Information tab, as shown in Figure 152.
3. Check the Enable HDD Sleeping checkbox.
4. Click the Apply button.
5. Click to exit.
Enabling eSATA Auto Archive
Enabling eSATA Auto Archive will allow DVR automatically backup record files on external eSATA
devices according to a preset schedule.
To enable eSATA Auto Archive:
1. Enter the HDD menu by going to Menu > System Configuration > HDD.
2. Select the Record Information tab, as shown in Figure 153.
3. Click on Setting button, as shown below.
Figure 153 Auto Archive Settings Menu
4. Check the Enable Archive checkbox.
5. Set the Archive Time.
6. Check the channels needed to be backup.
7. Click Apply button.
8. Click to exit.
Managing eSATA
When there is an external eSATA device connected to DVR, you can configure eSATA for the use of
Record/Capture or Export. To manage eSATA:
1. Enter the HDD menu by going to Menu > System Configuration > HDD.
2. Select the Record Information tab, as shown in Figure 153.
3. Select the eSATA Usage to Record/Capture or Export from the dropdown list.