User Manual

DS-7700NI-SP/9000/9600 Series HDVR/NVR User’s Manual
114
Figure 125 VCA Menu
12. Select the camera to setup VCA in using the camera dropdown list.
13. Click Enable VCA.
14. Press the Handing Set button to set up handing method.
3) Select the Arming Schedule tab to set the arming schedule. Up to 8 periods can be
configured. If the same schedule can be applied in other channel, click Copy.
4) Select the Handing tab to set the actions to take if VCA event is detected.
15. Click the Apply button to save the settings. Click OK to back to the previous menu.
16. If the same settings can be applied in other channels, click Copy to copy the same configuration
to other channels.
17. Click Apply to save the settings.