Quick Start Guide

Network Video Recorder Quick Start Guide
12
2.2.2 DS-96000NI-I24 Series
Purpose:
The following section introduces the HDD installation for the DS-96000NI-I24 series NVR.
Steps:
1. Unlock the front panel with the panel key.
Figure 2. 6 Unlock the Panel
2. To remove the cover from front panel, operate following steps:
1) Slightly pull the left part of the front panel out of the device along the direction arrow and ensure it
is a little above the handle.
2) Pull the front panel out of the device along the direction arrow .
Handle with care to avoid damage.
Figure 2. 7 Remove the Cover
3. Press the blue button to pop up the handle and hold the handle and pull the hard disk box out of the slot.
Figure 2. 8 Pull out Slot