User's Manual

Network Video Recorder User Manual
163
If you need to enable the HTTP service, you can set the HTTP authentication to enhance the
access security.
Go to System > System Service > System Service.
HTTP Authentication
Check the Enable HTTP to enable the HTTP service.
Select the digest as the HTTP Authentication in the drop-down list.
Click Save to save the settings.
Two authentication types are selectable: digest and digest/basic. For security reasons, it is
recommended to select digest as the authentication type.
Disabling HTTP
Purpose
The admin user account can disable the HTTP service from the GUI or the web browser.
After the HTTP is disabled, all its related services, including the ISAPI, Onvif and Gennetc, will
terminate as well.
Go to System > System Service> System Service.
Uncheck the Enable HTTP to disable the HTTP service.
RTSP Authentication
Purpose
You can specifically secure the stream data of live view by setting the RTSP authentication.
Go to System > System Service> System Service.
RTSP Authentication
Select the authentication type.