User's Manual

Network Video Recorder User Manual
135
Go to System > Event > Smart Event.
Select a thermal camera from the camera list.
(Optional) Check Save VCA Picture to save the captured pictures of detection.
Select an event detection (Temperature, etc.).
Set the arming schedule. Refer to Chapter 11.1 Configure Arming Schedule.
Set the linkage actions. Refer to Chapter 11.1 Configure Arming Schedule
Select the Arming Schedule tab.
Choose one day of a week and set the time segment. Up to eight time periods can be set within
each day.
Time periods shall not be repeated or overlapped.
Set Arming Schedule
Click Apply to save the settings.
Configure Alarm Linkage Actions.
Click Apply.
Queue Management
After connecting the device with queue management camera, you can set the arming schedule
and linkage action of queue management.
Before you start