User Manual
Table Of Contents
- Product Key Features
- Chapter 1 Introduction
- Chapter 2 Getting Started
- Chapter 3 Live View
- Chapter 4 PTZ Controls
- Chapter 5 Recording Settings
- Chapter 6 Playback
- 6.1 Playing Back Record Files
- 6.2 Auxiliary Functions of Playback
- Chapter 7 Backup
- Chapter 8 Alarm Settings
- Chapter 9 VCA Alarm
- 9.1 Face Detection
- 9.2 Vehicle Detection
- 9.3 Line Crossing Detection
- 9.4 Intrusion Detection
- 9.5 Region Entrance Detection
- 9.6 Region Exiting Detection
- 9.7 Loitering Detection
- 9.8 People Gathering Detection
- 9.9 Fast Moving Detection
- 9.10 Parking Detection
- 9.11 Unattended Baggage Detection
- 9.12 Object Removal Detection
- 9.13 Audio Exception Detection
- 9.14 Sudden Scene Change Detection
- 9.15 Defocus Detection
- 9.16 PIR Alarm
- Chapter 10 VCA Search
- Chapter 11 Network Settings
- Chapter 12 RAID
- Chapter 13 HDD Management
- Chapter 14 Camera Settings
- Chapter 15 NVR Management and Maintenance
- Chapter 16 Others
- Chapter 17 Appendix
Network Video Recorder User Manual
169
Wizard for Basic Configuration.
OPTION 2:
Enable the RAID function in the HDD Management Interface.
Steps:
1. Enter the disk mode configuration interface.
Menu > HDD > Advanced
Figure 12. 2 Enable RAID Interface
2. Check the checkbox of Enable RAID.
3. Click the Apply button to save the settings.
12.1.2 One-Touch Configuration
Purpose:
Through one-touch configuration, you can quickly create the disk array. By default, the array type to be created is
RAID 5.
Before you start:
1. The RAID function should be enabled, please refer to the Chapter 12.1.1 Enable RAID for details.
2. As the default array type is RAID 5, please install at least 3 HDDs in you device.
3. If more than 10 HDDs are installed, 2 arrays can be configured.
Steps:
1. Enter the RAID configuration interface.
Menu > HDD > RAID
Figure 12. 3 Physical Disk Interface
2. Check the checkbox of corresponding HDD No. to select it.
3. Click the One-touch Create button to enter the One-touch Array Configuration interface.