Quick Start Guide

Network Video Recorder Quick Start Guide
12
2.2.2 DS-96000NI-I24(/H) Series
Purpose:
The following section introduces the HDD installation for the DS-96000NI-I24(/H) series NVR.
Step 1 Unlock the front panel with the panel key.
Figure 2-6 Unlock the Panel
Step 2 To remove the cover from front panel, operate following steps:
1) Slightly pull the cover out of the device along the direction arrow ① and make it a
little above the left handle. The angle between the cover and the front panel must be
within 10°.
2) Pull the front panel out of the device along the direction arrow ②.
Handle with care to avoid damage.
Figure 2-7 Remove the Cover
Step 3 Press the blue button to pop up the handle and hold the handle and pull the hard disk box
out of the slot.