Operation Manual

Max 3cm
Mechanical
doorbell
Max 3cm
1
2 2
Installation – intercom and mechanical doorbell
If you have an intercom and a mechanical doorbell, you may need two door
transmitters, i.e. one for each sound source. Proceed as follows:
1 Pull the battery pull tab to start each door transmitter. Clean the wall
surface with the wet wipe and remove the protective lm from the velcro.
2 Mount a door transmitter to the left of the doorbell and another to the left
of the intercom’s speaker, as close to the sound sources as possible.
Testing
1 Ring the doorbell or intercom.
2 The Visit receiver lights up a door symbol and indicates with sound, lights or
vibrations (depending on the receiver). If it doesn’t react, read the section
Programming.
2
1
81 82