Operation Manual

Basic installation - single sound source
1 Remove the battery pull tag to start the door transmitter. Clean the wall with
the wet wipe and remove the protective lm from the velcro.
2 Mount the door transmitter to the left of the doorbell’s sound source as close
as possible. You can also use the supplied screw and plug.
Max 3cm
1
2
Installation – intercom and electronic doorbell
1 Connect the external microphone to the door transmitter. Remove the
protective lm from the microphone and attach it to the intercom’s speaker.
2 Remove the battery pull tag to start the door transmitter. Clean the wall with
the wet wipe and remove the protective lm from the velcro.
3 Mount the door transmitter to the left of the doorbell’s sound source as close
as possible. You can also use the supplied screw and plug.
External microphone
(sold separately)
Max 3cm
2
3 1
Electronic
doorbell
79 80