User Manual

DS-73xxHUI-K4, DS-73xxHQI-K4, DS-90xxHUI-K8 DVR User Manual
UM DS-73xxHUI-K4 DS-73xxHQI-K4 DS-90xxHUI-K8 032918NA 179
Figure 247, Local HDD Settings Interface
7. Select the Group number for the current HDD.
The default group No. for each HDD is 1.
8. Click OK to confirm the settings.
Figure 248, Confirm HDD Group Settings
9
. In the pop-up Attention box, click Yes to finish the settings.
14.4 Setting HDD Property
Purpose
The HDD property can be set to redundancy, read-only, or read/write (R/W). Before setting
the HDD property, set the storage mode to Group.
An HDD can be set to read-only to prevent important recorded files from being overwritten
when the HDD becomes full in overwrite recording mode.
When the HDD property is set to redundancy, the video can be recorded both onto the
redundancy HDD and the R/W HDD simultaneously so as to ensure high security and
reliability of video data.
1. Go to Menu > HDD > General.
2. Select HDD from the list and click
to enter the Local HDD Settings interface, as
shown below.