User Manual

UM DS-90xxHUHI-F8/N User Manual 041717NA 88
5. Select Trigger Channel tab and select one or more channels that will start to record or become
full-screen monitoring when an external alarm input is triggered.
6. Select Arming Schedule tab to set the channel’s arming schedule.
7. Choose one day of a week, a maximum of eight time periods can be set within each day.
NOTE: Time periods must not repeat or overlap.
Figure 137, Set Arming Schedule of Alarm Input
8. Select Linkage Action tab to set up alarm response actions of the alarm input.
9. Repeat the above steps to set up arming schedule of
other days of a week. You can also use Copy
button to copy an arming schedule to other days.
10. If necessary, select PTZ Linking tab and set PTZ linkage of the alarm input.
11. Set PTZ linking parameters and click the OK button to complete the settings of the alarm input.
NOTE: Check whether the PTZ or speed dome supports PTZ linkage.
One alarm input can trigger presets, patrols, or patterns of more than
one channel. But presets, patrols, and patterns are exclusive.