User Manual

UM DS-90xxHUHI-F8/N User Manual 041717NA 87
Figure 135, Set Arming Schedule of Motion Detection
11. Click Linkage Action tab to set up alarm response actions of motion alarm.
12. Repeat the above steps to set up arming schedule for other days of the week.
13. Click the OK button to complete the channel’s motion detection settings.
14. To set motion detection for another channel, repeat the above steps or just copy above settings to it.
NOTE: You are not allowed to copy the “Trigger Channel” action.
15.2. Setting Sensor Alarms
Set up handling method of an external sensor alarm.
1
. Enter Alarm Settings of System Configuration and select an alarm input, Menu > Record
Configuration > Trigger.
2. Select Alarm Input tab to enter Alarm Input Settings interface.
Figure 136, Alarm Status Interface of System Configuration
3. Set the handling method of the selected alarm input.
4. Check the Enable checkbox and click the Set button to set its alarm response actions.