User Manual

UM DS-90xxHUHI-F8/N User Manual 041717NA 69
NOTE: You cannot save files to a Read-Only HDD. To save files to the HDD,
change property to R/W.
If there is only one HDD and it is set to Read-Only, the DVR cannot
record any files. Only Live View mode is available.
If you set the HDD to Read-Only when the DVR is saving files to it,
the file will be saved in the next R/W HDD. If there is only one HDD,
the recording will be stopped.
12. One-Key H.264+ Enable/Disable
12.1. One-Key H.264+ Enabling for All Cameras
1. Enter the Record menu, Menu > Record.
2. Click Advanced to enter the Advanced Settings interface.
Figure 98, Record Information
3. Click Enable to enable H.264+ for all cameras and the following attention box pops up.
Figure 99, Attention Box
4. Click Yes to enable the function and reboot the device to have new settings taken effect.
NOTE: If H.264+ is already enabled for all analog cameras, when you click
the Enable button the following attention box pops up to remind you
that H.264+ is already enabled.
Figure 100, Attention Box
12.2. One-Key H.264+ Disabling for All Cameras
1. Enter the Record menu, Menu > Record.
2
. Click Advanced to enter the advanced interface.