User Manual

UM DS-90xxHUHI-F8/N User Manual 041717NA 61
B. Check the Enable Motion Detection checkbox.
C. Drag and draw the area for motion detection by mouse. If you want to set the motion detection for all
the area in the field of view, click Full Screen. To clear the motion detection area, click Clear.
NOTE: Areas that detect active motion turn solid red.
Figure 81, Motion Detection, Mask
D. Click Set to display the Motion Detection sub menu.
Figure 82, Motion Detection Settings
E. Select the channels which you want the motion detection event to trigger recording.
F. Click Apply to save the settings.
G. Click OK to back to the upper level menu.
H. Exit the Motion Detection menu.
3. Configure the Schedule, choosing Motion as the recor
d type.
11.4. Configuring Alarm Triggered Recording
Follow the procedure to configure alarm triggered recording.
1. Enter the Alarm Setting interface, Menu > Recording Configuration > Trigger.