User Manual

UM DS-90xxHUHI-F8/N User Manual 041717NA 60
Figure 79, Draw the Capture Schedule
2. Click and drag the mouse on the schedule.
3. Click on any area except the schedule table to finish and exit the drawing.
4. Repeat steps to set schedule for other channels. If the settings can also be used for other
channels, click Copy, and then choose the channel you want to copy to.
5. Click Apply in the Record Schedule interface to save the settings.
11.3. C
onfiguring Motion Detection Recording and Capture
Set the motion detection parameters. In Live View mode, once a motion detection event takes place, the
DVR will analyze it and perform actions to handle it. Enabling motion detection can trigger certain channels
to start recording or trigger full screen monitoring, audio warning, notify the surveillance center, send e-mail,
etc.
1. Enter the Motion Detection interface, Menu > Camera > Motion.
Figure 80, Motion Detection
2. Configure Motion Detection:
A. Choose camera you want to configure.