User Manual

UM DS-90xxHUHI-F8/N User Manual 041717NA 56
Figure 71, Copy Camera Settings
18. Set encoding parameters for sub-stream.
A
. Select the Sub-Stream tab.
Figure 72, Sub-Stream Encoding
B. Select a camera in the camera drop-down list.
C. Configure the parameters.
D. Click Apply to save the settings.
E. (Optional) If the parameters can also be used to other cameras, click Copy to copy the
settings to other channels.
NOTE: When a 3 MP signal input is connected, the sub-stream frame rate
cannot exceed 12 fps.
19. Set parameters for capture.
A
. Select the Capture tab.
Figure 73, Capture Settings
B. Select a camera in the camera drop-down list.
C. Configure the parameters.