User Manual

UM DS-90xxHUHI-F8/N User Manual 041717NA 23
7.2. User Logout
After logging out, the monitor turns to live view mode, and if you want to perform some operations, you will
need to enter the user name and password to log in again.
1. Enter the Shutdown menu, Menu > Shutdown.
Figure 24, Logout
2. Click Logout.
NOTE: After you have logged out of the system, menu operations on the
screen are invalid. Input a user name and password to unlock the
system.
8. Adding Cameras
8.1. Analog Cameras
8.1.1. Adding Analog Cameras
Analog cameras are enabled by default; no further action is required.
8.1.2. Disabling Analog Cameras To Increase Number of IP Cameras
N
OTE: Disabling an analog camera allows substitution of a network (IP)
camera in its place, up to 10 IP cameras maximum for
DS-7308HUHI-F4/N and up to 18 IP cameras maximum for
DS-7316HUHI-F4/N.
1. Go to MENU > CAMERAS > ANALOG (TAB).
2. Analog Camera List will display all enabled cameras.
3. Disable analog cameras in the Analog Cameras Enable Status section:
- Uncheck the camera checkbox of any camera(s) you wish to disable.
- Check the Analog checkbox to disable/enable all analog cameras.
4. Press APPLY to save settings.