User Manual

UM DS-90xxHUHI-F8/N User Manual 041717NA 144
20.3.2. Configuring Camera Parameters Settings
1. Enter the Image Settings interface, Menu > Camera > Image.
2. Select the Camera Parameters Settings tab.
Figure 221, Camera Parameters Settings
3. Select a camera from the drop-down list.
4
. Adjust the camera parameters. The parameters include Day to Night Sensitivity, Night to Day
Sensitivity, and IR Light Brightness. You can also click Default to reset the parameters to the
default settings.
5. Click Copy to copy the parameters of the current camera to other cameras.
6. Click Apply to save the settings.
NOTE: Day to Night Sensitivity, Night to Day Sensitivity, and IR Light
Brightness functions must be supported by the connected camera.
You cannot set the parameters if the connected camera does not
support them or there is no video signal.
The parameters are saved to the connected camera and are not
saved to the DVR.
The default value of Day to Night Sensitivity, Night to Day Sensitivity,
and IR Light Brightness is 5. The effective value ranges from 1 to 9.
If you exit from the interface and enter it again, the parameters
displayed are those you previously set.