User Manual

UM DS-90xxHUHI-F8/N User Manual 041717NA 12
2. IR Remote Control Operations
The DVR may also be controlled with the included IR remote control. The keys on the remote control closely
resemble the ones found on the front panel.
NOTE: Batteries (2 × AAA) must be installed before operation.
Table 1.1 , Description of the IR Remote Control Buttons
No.
Name
Description
1 POWER
Power on/off the device
Power on/off the device by pressing and holding button 5 seconds
2 MENU Button
Press the but
ton to return to the main menu after successful login
Press and hold button for 5 seconds
to
turn off audible key beep
In PTZ
Control mode, MENU button w
ill start wiper (if applicable)
In Playback mode, show
s
/hide
s
the control interface
3 REC Button
Enter
s
Manual Record setting menu
In PTZ control settings, press button and then
call a PTZ preset by
pressing n
umeric but
ton
A
lso used to turn audio on/off in Playback mode
4
DIRECTION
Button
Navigate between diff
erent fields and items in menus
In Playback mode, the Up and Do
w
n button
s
are
speed up and
slow down recorded video. Left and Right buttons will select the
next and previous record files.
In Live View mode, buttons cycle through channels
In PTZ control mode, control
s
movement of the PTZ camera
ENTER
Button
Confirm
s
sele
ction in any of the menu modes
C
an also be used to
tick
checkbox fields.
In Playback mode, play
s
or pause
s
the video
In single
-
frame Playback mode, advance video a single frame
5
PTZ Button
In Auto
-
switch mode,
stops
/start
s
auto switch
6
DEV
Enables/Disables Remote Control
7
Alphanumeric
Buttons
Switch
es
to corres
ponding channel i
n Live View or PTZ Control
mode
Input
s
numb
ers and characters in Edit mode
Switch
es
between channels in the Playback mode
8 ESC Button
Goes back to the previous menu
Press
to
Arm/disarm the device in Live View mode
9 PLAY Button
E
nter
s
All
-
day Playback mode
A
lso auto scan
s
in the PTZ Control menu
10 PREV Button
Switch
es
between singl
e screen and multi
-
screen modes
In PTZ Control mode, adjust
s
the focus in conjunction with the
A/FOCUS+ button
2.1. Troubleshooting the Remote Control
NOTE: Make sure batteries have been installed properly in the remote control.
Also note that the remote control must be aimed at the IR sensor on
the DVR front panel.
If there is no response after you press any button on the remote, follow the procedure below to
troubleshoot:
1. Go into Menu > Configuration > General > More Settin
gs by using the front control panel or the mouse.