User Manual

UM DS-90xxHUHI-F8/N User Manual 041717NA 121
17.7. Checking S.M.A.R.T. Information
The S.M.A.R.T. (Self-Monitoring, Analysis and Reporting Technology) is a monitoring system for HDD to
detect and report on various indicators of reliability in the hopes of anticipating failures.
1. Enter the HDD Detect interface, Menu > Maintenance > HDD Detect.
2. Click the S.M.A.R.T. Settings tab to enter the interface.
3. Select the HDD to view its S.M.A.R.T. information lis
t.
NOTE: To use the HDD even when S.M.A.R.T. checking has failed, check the
Continue checkbox.
Figure 195, S.M.A.R.T. Settings Interface
17.8. Detecting Bad Sectors
You can detect bad HDD sectors.
1. Enter the HDD Detect interface, Menu > HDD > HDD Detect.
2. Click the Bad Sector Detection tab to enter the interface.
3. Select an HDD and click the Detect button to start detecting.