User Manual

UM DS-90xxHUHI-F8/N User Manual 041717NA 120
Configure the event triggered recording schedule and enable the
corresponding event type.
13. (Optional) Click the Copy button to copy the cloud storage settings to other cameras. You can also click
the Analog/IP Camera checkbox to select all cameras.
14. Click OK button to go back to the cloud storage interface.
15. Click Apply to finish the settings.
Figure 192, Copy to Interface
17.6. Checking HDD Status
Check the status of the installed HDDs on the DVR so as to take immediate check and maintenance in
case of HDD failure.
17.6.1. Checking HDD Status in HDD Information Interface
1. Enter the HDD Information interface, Menu > HDD > Ge
neral.
2. Check the status of each HDD displayed on the list.
Figure 193, View HDD Status (1)
NOTE: If the HDD status is Normal or Sleeping , it is working normally. If the
status is Uninitialized or Abnormal , initialize the HDD before use. If the
HDD initialization fails, replace the HDD.
17.6.2. Checking HDD Status in System Information Interface
1. Enter the System Information interface, Menu > Maintenance > System Info.
2. Click the HDD tab to view the status of each HDD on the list.
Figure 194, View HDD Status (2)