User Manual

UM DS-90xxHUHI-F8/N User Manual 041717NA 113
Figure 178, NetHDD Information Interface
3. Add the allocated NetHDD.
4. Select type as NAS or IP SAN.
5. Configure the NAS or IP SAN settings.


 Adding a NAS Disk
1) Enter the NetHDD IP address in the text field.
2) Click Search to search the available NAS disks.
3) Select a NAS disk from the list or manually enter the directory in the NetHDD Directory text
field.
4) Click OK to add the configured NAS disk.
N
OTE: Up to eight NAS disks can be added.
Figure 179, Add NAS Disk


 Adding an IP SAN Disk
1) Enter the NetHDD IP address in the text field.
2) Click the Search button to find the available IP SAN disks.