User Manual

UM DS-90xxHUHI-F8/N User Manual 041717NA 109
4. Click the Export button to start exporting.
5. After the export is complete, click OK to finish the packet export.
Figure 167, Packet Export Attention
NOTE: Up to 1 MB of data can be exported each time.
16.3.3. Checking Network Status
Y
ou can also check the network status and quick set the network parameters in this interface.
1. Enter the Network Traffic interface, Menu > Maintenance > Net Detect.
2. Click the Network Detection tab to enter the Network Detection interface.
3. Click Status on the right bottom of the interface.
Figure 168, Checking Network Status
4. If the network is normal the following message box pops out.
Figure 169, Network Status Checking Result
5. If the message box pops out with other information instead of this, click the Network button to
show the quick setting interface of the network parameters.