User Manual

UM DS-90xxHUHI-F8/N User Manual 041717NA 106
Figure 162, E-mail Settings Interface
3. Configure the following e-mail settings:
• Enable Server Authentication (optional): Check the checkbox to enable the server
authentication feature.
• User Name: The user account of sender’s e-mail for SMTP server authentication.
• Password: The password of sender’s e-mail for SMTP server authentication.
• SMTP Server: The SMTP Server IP address or host name (e.g., smtp.263xmail.com).
• SMTP Port: The SMTP port. The default TCP/IP port used for SMTP is 25.
• Enable SSL (optional): Click the checkbox to enable SSL if required by the SMTP server.
• Sender: The name of sender.
• Sender’s Address: The e-mail address of sender.
• Select Receivers: Select the receiver. Up to three receivers can be configured.
• Receiver: The name of the e-mail receiver.
• Receiver’s Address: The e-mail address of the receiver.
• Enable Attached Picture: Check this checkbox if you want to send e-mail with attached
alarm images. The interval is the time between two captures of the alarm images.