User Manual

UM DS-90xxHUHI-F8/N User Manual 041717NA 100
encrypted verification code is empty and the configuration file’s
verification code is “ABCDEF.” Under either of these conditions,
create a new verification code or delete the default code and input the
same same default verification code.
16.2.5. Accessing the NVR
After configuration, you can access and manage the NVR on your mobile phone with the
HIK-Connect Cloud P2P app (iOS or Android) or through the HIK-Connect website
(www.hik-connect.com).
NOTE: For more help, see the help file on the Hik-Connect website at
www.hik-connect.com.
16.2.6. Configuring NTP Server
A
Network Time Protocol (NTP) Server can be configured on your DVR to ensure accuracy of the
system date/time.
1. Enter the Network Settings interface, Menu > Configuration > Network.
2. Select the NTP tab to enter the NTP Settings interface.
Figure 154, NTP Settings Interface
3. Check the Enable NTP checkbox to enable this feature.
4. Configure the following NTP settings:
• Interval: Time interval between the two synchronizing actions with NTP server. The unit is
minute.
• NTP Server: IP address of NTP server
• NTP Port: Port of NTP server
5. Click the Apply button to save and exit the interfac
e.