User Manual

UM DS-90xxHUHI-F8/N User Manual 041717NA 99
16.2.3. Enable Hik-Connect P2P on the NVR.
1. Go to Main Menu > System Configuration > Network > Platform Access.
2. Check the Enable checkbox.
3. Server Address must be “dev.hik-connect.com.” If not, check the Custom checkbox, and type
“dev.hik-connect.com.”
4. To turn Enable Stream Encryption on, select its checkbox.
5. Click the Apply button. Status will change to “Onlin
e” (if all settings are correct).
6. Note the Serial Number and Verification Code shown here (for use when registering the NVR
in your Hik-Connect account) or use the QR code displayed.
Figure 153, HIK-Connect Cloud P2P Settings Interface
16.2.4. Add the NVR to the Hik-Connect Service
To see a video stream on the Hik-Connect or iVMS-4500 mobile app, you must add the NVR.
1. Login to Hik-Connect mobile app with your user name,
e-mail, or mobile number and
password.
2. On the Home screen, click the “+” button (upper right corner).
3. Enter the device’s information.
• If you have device’s QR Code: Use QR Code Scanner to scan QR Code.
• If you do not have device’s QR Code: Enter device information manually:
1） Click the Edit (pencil) icon on top right.
2） Enter device serial number (device must be online), then click the OK button.
3） When the device appears on the “Results” screen, click the Add button.
4） Enter device’s 6-character Verification Code (all upper case), then click the OK button.
5） Click the Fi
nish button.
NOTES: For existing DVRs with Hik-Connect enabled, Hik-Connect will still be
enabled if upgraded. If Hik-Connect is disabled then enabled for the
first time, you must change the verification code if the encrypted
verification code is the same as that of the configuration file, or if the