User Manual

Digital Video Recorder User Manual
69
Figure 5. 8 Edit Schedule- All Day
4) To arrange other schedule, leave the All Day checkbox blank and set the Start/End time.
Figure 5. 9 Edit Schedule- Set Time Period
Up to 8 periods can be configured for each day. And the time periods cannot be overlapped with each other.
 To enable Event, Motion, Alarm, M | A (motion or alarm), M & A (motion and alarm) and POS triggered
recording, you must configure the motion detection settings, alarm input settings or VCA settings as well. For
detailed information, refer to Chapter 8.1, Chapter 8.7 and Chapter 9.
 The VCA settings are only available to the smart IP cameras.
Repeat the above steps 1)-4) to schedule recording for other days in the week. If the schedule can also be set
to other days, click Copy.
Figure 5. 10 Copy Schedule to Other Days
The Holiday option is available when you enable holiday schedule in Holiday settings. See Chapter 5.7
Configuring Holiday Record.
5) Click OK to save setting and back to upper level menu.
Draw the schedule
1) Click on the color icon to select a record type in the event list on the right-side of the interface.