Operation Manual

User Manual of Digital Video Recorder

Before you start:

Connect analog speed dome or network speed dome which supports one-touch park function.

For analog speed dome, it must be connected via Hikvision protocol.

Steps:

1. Click the button in the lower-right corner of the PTZ setting interface;

or press the PTZ button on the front panel;

or click the PTZ Control icon in the quick setting toolbar during the live view process;

or click PTZ Control on the right-click menu to open the PTZ control panel in live view mode.

2. Select the PTZ camera from the drop-down list for control.

3. Click the icon on the panel and then click the One-touch tab to enter the One-touch control interface.

4. There are 3 one-touch park types selectable, click the corresponding button to activate the park action.

Park (Quick Patrol): The PTZ camera starts the quick patrol (from preset 1 to preset 32 in order)

automatically after the park time. The undefined preset will be skipped.

Park (Patrol 1): The PTZ camera moves according to the path of predefined patrol 1 after the park time.

Park (Preset 1): The PTZ camera moves to the location of predefined preset 1 after the park time.

5. Click the button again to inactivate the corresponding park action.

Figure 4. 9 Control Panel-Call Linear Scan

The park time can only be set through the local menu of PTZ camera and the default value is 5s.

4.3 PTZ Control Panel

To enter the PTZ control Panel, there are 2 ways supported:

Option1:

In the PTZ settings interface, click the PTZ button on the lower-right corner.

Option2:

In the Live View mode, you can press the PTZ Control button on the front panel or on the remote control, or click

the PTZ Control icon in the quick setting toolbar, or click PTZ Control on the right-click menu to enter the

PTZ control panel.